Model | LTM35 |
Output per lot | 3.5 cubic metres |
Drum rotation | discharge port height 1.8 meters, cab and tank |
Capacity | Up to 4.5 batches per hour, 15.5 cubic hours |
Engine | Yuchai Power Ycd4j22t Foshan 16, diesel, |
Drive mode | The engine is directly connected to the 280 torque converter, through the drive |
Climb | 40 degrees |
Speed | dual altitude, low speed 0-25 kph, high speed 0-40kph |
Driver's seat | Widen the luxurious cab of the excavator, front window can be opened, anti-roll, |
Hydraulic system | Open type oil, plunger type motor, two gear pumps to participate in the work |
Joystick | Two hydraulic pilot joysticks control the scoop, upper arm, 270 turn, lift tank |
Bucket | 0.65 cubic, hydraulic gate |
Clay Groove | equipped with one 150CM Removable Chute to increase the length of discharge |
Water Supply System | self-priming driven pump, 24V self-timing Centrifugal pump, 24V car wash machine |
Brake | Use Small Servo pump on independent double circuit, use single |
Steering | Hydraulic articulated steering |
TIRE | 12R-22.5 steel wire high pressure vacuum tire |
Power System | 24V |
Fuel tank / Water tank | 1 * 800 l water tank, 130 l diesel fuel tank, 130 l hydraulic fuel tank |
Weight | 8,100 kg |
Length, width, height / wheelbase / Wheelbase | 7100mm * 2750mm * 3300mm * 2700mm * 2200mm |
Turning radius | 2,900 mm |
Other | Q345 manganese steel frame, excavator luxury cab, driving impact, |
With technological innovation, our product configuration and parameters will continue to change without notice;
if there is any doubt, the specific confirmation of our international trade sales shall prevail;