1. Energy saving and noise reduction: It adopts a large torque reserve coefficient engine and three-stage EFI control technology, which is more energy saving; adopts advanced shock absorption and noise reduction technology, and the noise of the whole machine is low.
2. Strong power: Weichai engine is used to match the torque converter, and the optimal circular diameter of the torque converter is selected to achieve the best match between the torque converter and the engine, reduce the start-up acceleration time of the whole vehicle, and increase the low-speed work. The torque output is strong and powerful.
3. Efficient operation: The blade arc is optimized for fast and efficient digging and dumping, achieving optimal load distribution and minimal material accumulation in the turntable area.
4. Safe and reliable: full hydraulic braking system, load sensing steering system, international matching of key components, safe and reliable system; global optimization of structural components CAE, and special research with universities and research institutes.
5. Mobility and flexibility: The single-cylinder front axle with large steering angle of LTMG's patented technology, combined with the articulated frame, has a small turning radius and flexibility.
6. Comfortable operation: The diamond-shaped cab has six-point support for shock absorption, the operating mechanism is optimized, the operating force and operating stroke are reduced, the operating force is reduced by 30%, the operation is more flexible and comfortable, and the ergonomic operating system and operating environment are more comfortable .
model | LG100 | ||
basic parameter | Engine Model | 4BT3.9-C75(102hp) | |
Rated power/speed | 75kW/2400rpm | ||
Outer size of the whole machine (standard) | 6880×2375×3150mm | ||
Weight of the whole machine (standard) | 7000kg | ||
performance parameter | Forward speed | 5、8、11、17、24、38Km/h | |
Backward speed | 5、11、24km/h | ||
Traction force f=0.8 | 41.6kN | ||
Maximum climbing capacity | 30% | ||
Tire inflation pressure | 350kPa | ||
Operating system pressure | 16MPa | ||
Transmission pressure | 1.3—1.8Mpa | ||
work parameter | Maximum steering angle of front wheels | ±49° | |
Maximum tilt angle of front wheels | ±17° | ||
Maximum front axle swing angle | ±15° | ||
Maximum steering angle of frame | ±27° | ||
Minimum turning radius | 5.9m | ||
spatula | Maximum lifting height | 300mm | |
Maximum shovel depth | 350mm | ||
Max. tilting angle | 45° | ||
Cutting angle | 28°—70° | ||
Turning angle | 120° | ||
Length x Chord Height | 3048x450mm | ||
main | Engine | Cummins 4BT3.9 | |
transmission | advance BS428 | ||
torque converter | advance YJ315 | ||
Axle | xzmeritor | ||
Instrument | Imported Instruments | ||
Steering Gear | EATON 403 Series | ||
throttle | Safim 123213/A | ||
gear pumps | permcotj 1121012278 |
With technological innovation our product configuration and parameters will continue to change without notice;
if there is any doubt the specific confirmation of our international trade sales shall prevail;